Page 79 - Fan Coil Unit

Model Functions
Single-Phase Coupler
FE-02-C2

- Installed in places where single-phase power lines are used
- Other functions are the same as the 3-phase coupler

Wired Remote Controller for Power Line
Communication - Connected by wire to one input/output control PCB
DFC-02W
- Control up to a maximum of 32 units
- Allows administrator settings and configuration verification checks
- Operation mode/airflow volume/temperature/alarm/group operation
- Infrared receiver installed for the use of a wireless remote controller

Indoor Temperature Sensor
ST-T10K-R

- Detects the indoor temperature and transmits it to the input/output PCB
- Controls the airflow volume and valve of the fan coil unit based on the
temperature detected by the sensor

Pipe Temperature Sensor
ST-T10K-C

- Detects the temperature of the heating and cooling coil
- A temperature sensor is used for freeze prevention by detecting the coil
temperature

BacNet/IP Server
PFC-BN-01
- Collects operation data of the FCU controller
- Converts to BacNet/IP protocol
- Communicates with the FCU using the Modbus TCP/IP protocol
- Collect data for up to 1000 devices

79